| |
H-1550 / H-2500
|
| Max. Length of engine block |
| 1550 mm (61”) |
2500 mm (98.5”) |
|
| Maximum distance from built in parallels to centre of boring bar |
| 815 mm (32”) |
815 mm (32”) |
|
| Minimum distance from built in parallels to centre of boring bar |
515 mm (20”) |
| Boring capacity with standard boring bars |
| 32-150mm (1.25"-5.90") |
52-225mm (2.05"-8.85”) |
|
| Boring capacity with optional boring bar |
| 24-260mm (0.94"-10.23”) |
24-260mm (0.94"-10.23”) |
|
| Spindle speeds (infinitely variable) |
|
| Feed both direction (auto-manual) |
0.04mm,0.15mm |
| Max travel of boring bar (standard) |
| 325mm (12.8"). |
325mm (12.8"). |
|
| Additional travel with extension bar (optional) |
| 300mm (11.8") |
300mm (11.8") |
|
| Spindle drive motor 415v,50hz,3ph(diff. Volt. On request) |
|
| Length of the machine |
3550mm (139.8") | 4700mm (185") |
| Width of the machine |
| 760mm (29.9") |
760mm (29.9") |
|
| Height of the machine |
| 2200 (86.6") mm |
2200 (86.6") mm |
|
| Work space required |
5050x1760mm (198.8”x69.3”) | 7250x1760mm (285.4”x69.3”) |
| Packing case outer size (lxwxh) |
| 3835x1065x1680mm (151x41.9”x66.4”) |
5040x1065x1680mm (198.4x41.9”x66.4”) |
|
| Shipping volume |
|
